LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2006 >> Mark LT 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Acceleration Control System - F150 & Mark LT >> Removal And Installation >> Accelerator Pedal - Fixed >> Removal and Installation

Removal and Installation

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Disconnect the accelerator pedal electrical connector.
  3. Remove the 3 accelerator pedal assembly bolts and the accelerator pedal assembly.
    • To install, tighten to 25 Nm (18 lb-ft).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals