LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2005 >> Aviator AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seating >> Disassembly And Assembly >> Rear Seat Backrest - 40 Percent, Second Row >> Disassembly and Assembly

Disassembly and Assembly

  1. Remove the second row 40 percent seat. For additional information, refer to REAR SEAT - 40 PERCENT, SECOND ROW .
  2. Remove the second row 40 percent seat backrest. For additional information, refer to REAR SEAT BACKREST - SECOND ROW, 40 PERCENT .
  3. Remove the head restraint.
    4. CAUTION: Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat backrest foam pad.
  4. Separate the hook and loop fasteners and invert the trim cover as high as it will go.
    5. NOTE: The inboard and outboard head restraint sleeves are not interchangeable.
    NOTE: The head restraint sleeves incorporate an alignment tab that must face forward when installed.
    Fig 1: Identifying Head Restraint Sleeve
    G03860643Courtesy of FORD MOTOR CO.
  5. Squeeze together the tip of the head restraint sleeve and pull the sleeve out of the frame tube.
  6. Remove the seat backrest trim cover.
  7. Remove the seat backrest foam pad from the backrest frame.
  8. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals