LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1986 >> Town Car Base >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Automatic Level Control >> Diagnostic Testing >> Test B >> Power Monitor Light

Power Monitor Light

  1. Connect test light probe lead to circuit 37, pin 5, at module connector (battery B+). Connect clip lead to ground. If test light is on, proceed to step  2 . If test light is off, proceed to TEST E  .
    NOTE: Test light must remain connected during individual test unless otherwise noted.
  2. Connect lead with clip to the diagnostic pigtail, circuit 693, pin 7, near the module connector. If test light is off, proceed to TEST C  . If test light is on, recycle ignition switch from "RUN" to "OFF". If light remains on, replace module. Perform SYSTEM OPERATION CHECK  .
scientia non olet · About LEMON Manuals