LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> UX 200 Luxury >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control / Dynamic Control Systems (Service Information) >> REAR SPEED SENSOR (for AWD) >> Removal [10/2018 - ] >> Procedure

Removal [10/2018 - ]: Procedure

  1. REMOVE REAR WHEEL 

    Refer to REMOVAL [10/2018 - ]

  2. REMOVE REAR SKID CONTROL SENSOR 
    1. Using a screwdriver with its tip wrapped with protective tape, Disconnect the rear skid control sensor connector from the rear skid control sensor.
      GTY783584Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
    2. Remove the bolt and rear skid control sensor from the rear axle carrier sub-assembly.
      GTY804610Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals