LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LS 500h AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Sub Battery System - Service Information >> Battery Current Sensor >> Removal [10/2020 - 11/2021] >> Procedure

Removal [10/2020 - 11/2021]: Procedure

  1. PRECAUTION 
    NOTE:

    After the power switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.

    Refer to BEFORE DISCONNECTING BATTERY [10/2020 - 11/2021]

  2. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 25

  3. REMOVE TOOL BOX 

    Refer to PROCEDURE - Step 3

  4. REMOVE BATTERY STATE SENSOR ASSEMBLY 
    1. Disconnect the battery state sensor assembly connector.
      GTY810841Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the nut and disconnect the wire harness from the battery state sensor assembly.
      GTY835095Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Loosen the nut and remove the battery state sensor assembly from the auxiliary battery.
      GTY810840Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals