LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LS 500 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Advanced Driver Assistance System - Service Information >> Automatic High Beam Main Switch >> Installation [10/2020 - ] >> Procedure

Installation [10/2020 - ]: Procedure

  1. INSTALL TURN SIGNAL SWITCH 
    1. Align the connector of the turn signal switch with the connector of the steering switch housing and set the turn signal switch.
    2. Push the turn signal switch to attach the claw to install it.
      GTY791031Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction - -
    3. Install the 2 screws.
      GTY791562Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL UPPER STEERING COLUMN COVER 

    Refer to PROCEDURE - Step 2

  3. INSTALL LOWER STEERING COLUMN COVER 

    Refer to PROCEDURE - Step 2

  4. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM 

    Refer to CUSTOMIZE PARAMETERS [12/2017 - ]

scientia non olet · About LEMON Manuals