LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> LS 460 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information >> Remote Touch >> Installation [09/2015 - ] >> Procedure

Installation [09/2015 - ]: Procedure

  1. INSTALL REMOTE OPERATION SWITCH 
    1. Install the remote operation switch with the 4 screws.
  2. INSTALL INTEGRATION PANEL SUBASSEMBLY 
    1. Move the remote touch assembly in the direction of the arrow in the illustration.
      GTY659689Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the 2 screws.
  3. INSTALL COVER 
    1. Attach the 2 clips to install the cover.
  4. INSTALL SWITCH KNOB 
    1. Push on the switch knob to install it.

      HINT: 

      Make sure the orientation of the switch knob is correct when installing it.

  5. INSTALL REMOTE OPERATION BOARD 
    1. Move the remote touch assembly in the direction of the arrow in the illustration and set it on the upper console panel sub-assembly.
      GTY419697Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Attach the 7 claws to install the remote operation board.
  6. INSTALL UPPER REAR CONSOLE PANEL SUBASSEMBLY 

    Refer to PROCEDURE - Step 8

  7. INSTALL NO. 3 BOX PANEL 

    Refer to PROCEDURE - Step 9

  8. INSTALL SHIFT LEVER KNOB SUBASSEMBLY 

    Refer to PROCEDURE - Step 10

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 11

  10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH 

    Refer to PROCEDURE - Step 12

scientia non olet · About LEMON Manuals