LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2016 >> ES 300h >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System (Service Information) >> Vacuum Sensor >> Installation [07/2015 - ] >> Procedure

Installation [07/2015 - ]: Procedure

  1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR 
    1. Install the manifold absolute pressure sensor to the intake manifold with the bolt.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

    2. Connect the vacuum hose and connector to the manifold absolute pressure sensor.
  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 84

scientia non olet · About LEMON Manuals