Removal [08/2014 - ]: Procedure
- PRECAUTION NOTE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work (See article. Refer to PRECAUTION [08/2014 - ] ).
- REMOVE REAR NO. 2 FLOOR BOARD
Refer to PROCEDURE - Step 1
- REMOVE REAR DECK FLOOR BOX
Refer to PROCEDURE - Step 2
- REMOVE REAR NO. 3 FLOOR BOARD
Refer to PROCEDURE - Step 3
- REMOVE DECK FLOOR BOX RH
Refer to PROCEDURE - Step 4
- REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE
Refer to PROCEDURE - Step 5
- DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See article. Refer to INITIALIZATION [08/2014 - 08/2015] Refer to INITIALIZATION [08/2015 - ] ).
- REMOVE METER HOOD SUB-ASSEMBLY
Refer to PROCEDURE - Step 8
- REMOVE POWER SWITCH