Multi-terrain Select Indicator Light does not Come ON: Procedure
- CHECK CAN COMMUNICATION LINE See step 3
NG → See step 4
OK: Go to next step
- CHECK DTC
- Check for DTCs. Refer to DTC CHECK / CLEAR [06/2012 - ]
.RESULT
Result Proceed to DTC is not output A DTC is output B
B → See step 5
A: Go to next step
- Check for DTCs. Refer to DTC CHECK / CLEAR [06/2012 - ]
.
- CHECK DTC (DRIVING SUPPORT SWITCH CONTROL ECU)
- Check if DTC B2660 is output. Refer to DTC CHECK / CLEAR [06/2012 - ]
.RESULT
Result Proceed to DTC is output A DTC is not output B
B → See step 6
A → See step 7
- Check if DTC B2660 is output. Refer to DTC CHECK / CLEAR [06/2012 - ]
.
- GO TO CAN COMMUNICATION SYSTEM (HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS). Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2012 - ]
- REPAIR CIRCUITS INDICATED BY OUTPUT DTCS. Refer to DIAGNOSTIC TROUBLE CODE CHART [06/2012 - ]
- GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING). Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2012 - ]
- GO TO METER / GAUGE SYSTEM (DIAGNOSTIC TROUBLE CODE CHART). Refer to DIAGNOSTIC TROUBLE CODE CHART [06/2012 - ]