DTC C1210/36 Zero Point Calibration of Yaw Rate Sensor Undone; DTC C1336/98 Zero Point Calibration of Acceleration Sensor Undone: Description
DTC DETECTION CONDITION CHART
| DTC No. |
INF Code |
DTC Detecting Condition |
Trouble Area |
| C1210/36 |
336 |
Yaw rate sensor zero point calibration is unfinished. |
- Zero point calibration undone (Perform zero point calibration and check DTC. If DTC is not output again, the sensor is normal.)
- Yaw rate and deceleration sensor
|
| C1336/98 |
318 |
- Vehicle speed increases with unfinished zero point calibration.
- Zero point calculation is not within specified range when zero point calibration is finished.
|
- Zero point calibration undone (Perform zero point calibration and check DTC. If DTC is not output again, the sensor is normal.)
- Yaw rate and deceleration sensor
|