Customize Parameters
HINT:
The following items can be customized.
NOTE:
- After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
- Be sure to record the current settings before customization.
- When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the system, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).
- CUSTOMIZE
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the tester on.
- Enter the following menus: Select: Customize setting.
- Select the setting by referring to the table below.
Security
CUSTOMIZE PARAMETERS - SECURITYDisplay (Item) Default Contents Setting Passive Mode OFF PASSIVE MODE is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not in the actuation area and driver side door is closed, even if doors are not locked by wireless or door key lock operation
In PASSIVE MODE, if you do not perform following operations within 14 seconds after door is opened during armed state, theft deterrent system will judge that condition as a theft and switch to alarm sounding state- Unlock any door by key or wireless operation
- Reconnect battery
- Turn the engine switch on (IG)
ON/OFF Warning by Horn ON Function that makes vehicle horn and theft deterrent horn be able to be used as a warning device ON/OFF Entry Delay Time 14 s Function that changes entry delay time (time before warning starts) for PASSIVE MODE 0 s/14 s/30 s