ABSORBER CONTROL ACTUATOR (for Rear Side): Inspection

INSPECT ABSORBER CONTROL ACTUATOR

Measure the resistance of the actuator.

Standard resistance

STANDARD RESISTANCE REFERENCE

Tester Connection	Specified Condition
1 (B+) - 3 (GND)	12.0 to 12.8 Ω
2 (A+) - 3 (GND)
4 (B-) - 3 (GND)
5 (A-) - 3 (GND)

Fig 1: Identifying Absorber Control Actuator Connector Terminals

G05296538

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Check the shaft stop position.
1. Connect the connector to the absorber control actuator.
2. Check absorber control actuator operation (see OPERATION CHECK ).
  1. Enter TEST MODE and turn the power switch ON (READY).
  2. Check the shaft rotation when depressing the brake pedal.
    OK:
    
    Every time the brake pedal is depressed, the absorber control actuator rotates in the hard to soft direction in 15° intervals up to a maximum angle of 120°.
    
    Fig 2: Checking Absorber Control Actuator Operation
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002