SKID CONTROL ECU (for 1UR-FSE): Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
REMOVE ENGINE ROOM SIDE COVER LH (See REMOVAL )
REMOVE SKID CONTROL ECU ASSEMBLY
1. Disconnect the connector.
2. Remove the 3 bolts and skid control ECU assembly.
  
  Fig 1: Locating Skid Control ECU Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Pull the 2 lock levers upward to release the lock and disconnect the 3 connectors.
  
  Fig 2: Pulling Lock Levers Upward To Release Lock
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002