LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 385 (Body, Lock & Security System) >> Hood >> Removal and Installation of Hood Lock Control >> Removal

Removal and Installation of Hood Lock Control: Removal

WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front grille. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the front fender protector (LH). Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect the hood lock cable from the hood lock, and unclip it from the radiator core support upper and hood ledge.
  4. Remove the bolt and the hood opener.
  5. Remove the grommet on the dash lower panel, and pull the hood lock cable toward the passenger room.
    CAUTION: While pulling, be careful not to damage the outside of the hood lock cable.
    Fig 1: Identifying Hood Opener
    G04199199Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals