LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 542 (Audio/Visual) >> Front No. 2 Speaker >> Installation

Front No. 2 Speaker: Installation

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FRONT NO.2 SPEAKER 
    1. Connect the connector.
    2. Install the front No.2 speaker with the 2 bolts.
      Fig 1: Identifying Front No. 2 Speaker Bolts
      G05270759Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO.1 SPEAKER HOLE COVER 
    1. Engage the 4 clips and install the No. 1 speaker hole cover.
      Fig 2: Identifying No. 1 Speaker Hole Cover & Clips
      G05270761Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL MULTI-DISPLAY  (See INSTALLATION  )
  4. INSTALL RADIO RECEIVER  (See INSTALLATION  )
  5. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER  (See INSTALLATION )
  6. INSTALL CONSOLE PANEL UPPER FRONT  (See INSTALLATION )
  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 
  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  9. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal (See INITIALIZATION ).
scientia non olet · About LEMON Manuals