LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> IS 300 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Basic Diagnostic Procedures) >> Ignition Checks >> Ignition Coil Resistance >> GS300 & Is300

GS300 & Is300

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove ignition coil. See IGNITION SYSTEM in REMOVAL, OVERHAUL & INSTALLATION article.
  2. Using ohmmeter, check ignition coil primary resistance between positive (+) and negative (-) electrical terminals on ignition coil. See Fig 1. Replace ignition coil if ignition coil primary resistance is not within specification. See IGNITION COIL RESISTANCE (OHMS)  table.
  3. Using ohmmeter, check ignition coil secondary resistance between electrical terminal and spark plug terminal on ignition coil. See Fig 2. Replace ignition coil if ignition coil secondary resistance is not within specification. See IGNITION COIL RESISTANCE (OHMS)  table. Reinstall ignition coil.
    IGNITION COIL RESISTANCE (OHMS)

    Application Primary Secondary
    GS300 & IS300
    Cold (1) .33-.52 8500-14,700
    Hot (2) .42-.61 10,800-17,200
    (1) Cold is with coolant temperature of 14-122°F (-10-50°C).
    (2) Hot is with coolant temperature of 122-212°F (51-100°C).
    Fig 1: Checking Ignition Coil Primary Resistance (GS300 & IS300)
    G98C11231Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Fig 2: Checking Ignition Coil Secondary Resistance (GS300 & IS300)
    G98D11232Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002