Section 603 (Fog Lamps): Adjustment

WARNING: This page is about a different car, the 2004 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.

PUT VEHICLE UNDER THESE CONDITIONS
1. Prepare the vehicle by performing the following.
  - Make sure the body around the headlamps has no damage or deformation.
  - Fill the fuel tank to full.
  - Inflate the tires to an appropriate pressure (See INSPECTION ).
  - Make sure the vehicle is on a level surface.
  - Sit a person weighting approximately 68 kg (15 lb) in the driver seat.
  - Bounce the vehicle up and down to settle the vehicle suspension.
2. Start the engine.
ADJUST FOG LIGHT AIM
1. The fog lamp aim can be adjusted by moving the aiming screw in the vertical direction.
HINT:

The fog lamp aim moves up when turning the screw clockwise, while it moves down when turning the screw counterclockwise.

Fig 1: Adjusting Fog Light Aim
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002