Virtual Cd Track Number/Artist/Title Incorrectly Displayed On Instrument Cluster (LTB00681V2)

Publication date: 2014-11-06
Reference number: LTB00681V2
Supersedes refnos: LTB00681, LTB00681NAS2

VIRTUAL CD TRACK NUMBER/ARTIST/TITLE INCORRECTLY DISPLAYED ON INSTRUMENT CLUSTER

TECHNICAL SERVICE BULLETIN

Reference Number(s): LTB00681NAS2, Date of Issue: November 6, 2014

LAND ROVER:	2013-2014 Range Rover (LG); 2014 Range Rover Sport (LW)
SECTION:	413-01
AFFECTED VEHICLES:	Range Rover (LG) Model Year: 2013-2014 VIN: DA000083-EA152793; Range Rover Sport (LW) Model Year: 2014 VIN: EA000002-EA339982

NOTE: This reissue replaces all previous versions. Please destroy all previous versions.

MARKETS

NAS

CONDITION SUMMARY

Situation: The virtual CD track number, artist, and/or title may:

display incorrectly on the Instrument Cluster while displaying correctly on the Touch Screen; and/or
display correctly for the first few tracks on the Instrument Cluster, but stops incrementing the CD track number as the CD is played

This issue occurs mainly when more than one (1) virtual CD is loaded.

Cause: This may be caused by incorrect calibration of the Instrument Cluster

Action: Should a customer express this concern, follow the Service Instruction outlined below.

PARTS

No Parts Required

TOOLS

NOTE: This is an 'Active Bulletin' that will display a functional programming shortcut if accessed within a diagnostic session using SDD.

SDD with latest DVD and Calibration File; first available on DVD139.09 v.192

Jaguar Land Rover-approved Midtronics battery power supply

WARRANTY

NOTE: Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to TOPIx to obtain the latest repair time.

NOTE: DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

DESCRIPTION	SRO	TIME (HOURS)	CONDITION CODE	CAUSAL PART
Update Instrument Cluster software - Range Rover Sport (L494)	88.90.34	0.9	42	LR054144
Update Instrument Cluster software - Range Rover (L405)	88.90.03	0.9	42	LR054144

NOTE: Normal Warranty procedures apply.

SERVICE INSTRUCTION

CAUTION: A Jaguar Land Rover-approved Midtronics battery power supply must be connected to the vehicle battery during SDD diagnosis/module programming.

CAUTION: Ensure all ignition 'ON'/ignition 'OFF' requests are carried out; failure to perform these steps may cause damage to control modules in the vehicle.

NOTE: SDD must be loaded with DVD139.09 v.192 or later.

Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle battery.
Turn ignition 'ON' (engine not running).
Connect the Symptom Driven Diagnostics (SDD) system to the vehicle and begin a new session.
Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle and initiating the data collect sequence.
Select 'Diagnosis' from the Session Type screen.
Select the 'Selected Symptoms' tab, and then select:
- Electrical > Instruments > Information and message centre > Message display area 7. Select 'continue'.
Select the 'Recommendations' tab, and then select 'Run' to perform the 'Configure existing module - Instrument cluster control module' option.
Follow all on-screen instructions to complete this task.
Exit the current session.
Disconnect the SDD and the battery power supply from the vehicle.