Electronic Automatic Transmission Electronic Control Unit: Removal

1. Remove battery cover. Disconnect battery ground lead. Remove 3 screws and trim clip securing lower trim casing to left front seat. See Fig 1. Remove 3 nuts securing speaker power amplifier bracket to the body. See Fig 2.
2. Disconnect connector from Electronic Automatic Transmission Electronic Control Unit (EAT ECU) located on underside of amplifier mounting bracket. Remove 2 nuts securing EAT ECU to mounting bracket and remove EAT ECU. See Fig 3.

Fig 1: Removing Left Front Seat Lower Trim

Courtesy of LAND ROVER NORTH AMERICA, INC.

Fig 2: Removing Speaker Power Amplifier/Electronic Automatic Transmission Electronic Control Unit Bracket

Courtesy of LAND ROVER NORTH AMERICA, INC.

Fig 3: Removing Automatic Transmission Electronic Connector

Courtesy of LAND ROVER NORTH AMERICA, INC.