Repair Procedures: Removal
WARNING: This page is about a different car, the 2024 Kia K5. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative (-) battery terminal.
- Remove the under cover.
(Refer to " Removal And Installation ")
- Disconnect the crankshaft position sensor connector (A) and separate the wiring fixing clip (B).
- After separating the connector (A) from the bracket, remove the CKPS (B) by removing the mounting bolt.
Tightening torque:
9.8 -11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)