LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> K5 LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Front Door Assembly) >> Front Door Outside Handle >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2024 Kia K5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • Put on gloves to prevent hand injuries.
  1. Remove the front door module.

    (Refer to " Replacement  ") 

  2. Press the lock pin and separate the front door outside handle connector (A).
    G13835382Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the hole plug (B).
  4. After loosening the mounting bolt, then remove the front door outside handle cover (A).

    Tightening torque: 

    7.8 -11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb.ft)

    G13835383Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the front door outside handle (A) by sliding it rearward.
    G13835384Courtesy of KIA MOTORS AMERICA, INC.
  6. Install in the reverse order of removal.

    Information 

    • Make sure the connector is connected properly.
    • Make sure the door locks/unlocks and opens/closes properly.
    • Be sure to install the outside handle pad (A) between the outside handle and the door panel.
    G13835385Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals