LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Keyless Entry And Burglar Alarm (PHEV) >> Repair Procedures >> Inspection >> Front Door Lock Module Inspection

Front Door Lock Module Inspection

  1. Remove the front door trim.

    (Refer to Body - "FRONT DOOR TRIM ")

  2. Remove the front door module.

    (Refer to Body - "FRONT DOOR MODULE ")

  3. Disconnect the connector from the actuator.
    Fig 1: Front Door Lock Module Connector End View
    G12351516Courtesy of KIA MOTORS AMERICA, INC.
    FRONT DOOR LOCK MODULE PIN INFORMATION (LH/RH)

    No. Pin Information
    LH RH
    1 - AJAR switch
    2 Motor 1 COM
    3 Motor 2 Lock/Unlock switch
    4 Key Unlock switch Key Lock switch
    5 Key Lock switch Key Unlock switch
    6 Lock/Unlock switch Motor 2
    7 COM Motor 1
    8 AJAR switch -
  4. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
G12351517Courtesy of KIA MOTORS AMERICA, INC.
G12351518Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals