LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2014 >> Forte Koup EX, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Control System - 1.8L) >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2014 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses (B) from the valve.
  4. Remove the installation nut, and then remove the valve from the surge tank.
    Fig 1: Variable Intake Solenoid Valve Connector & Vacuum Hoses
    G09748805Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals