Power Circuit Inspection

Check voltage
1. IG "OFF" & Disconnect OCV connector.
2. IG "ON".
3. Measure voltage between power terminal of the OCV harness connector and chassis ground.
  Specification: B+
  
  Fig 1: Measuring Voltage Between Power Terminal Of OCV Harness Connector And Chassis Ground
  Courtesy of KIA MOTORS AMERICA, INC.
4. Is the measured voltage within specification?
  YES
  
  Go to "CONTROL CIRCUIT INSPECTION " procedure.
  
  NO
  
  Repair or replace as necessary and then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.