LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Soul +, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Control System - 1.6L) >> Knock Sensor (KS) >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold (Refer to INTAKE MANIFOLD .
  3. Disconnect the injector connector (A).
  4. Remove the installation bolt (B), and then remove the sensor from the cylinder block.
    Fig 1: Knock Sensor Component Location
    G08327970Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals