Wiring Precautions

SRS wiring can be identified by special yellow outer covering. Observe the instructions described in this service information.

• Never attempt to modify, splice, or repair SRS wiring. If there is an open or damage in SRS wiring, replace the harness.
  Fig 1: Modifying, Splicing, Or Repairing SRS Wiring

  Courtesy of KIA MOTORS AMERICA, INC.
• Be sure to install the harness wires so that they are not pinched, or interfere with other parts.
  Fig 2: Pinched SRS Wiring

  Courtesy of KIA MOTORS AMERICA, INC.
• Make sure all SRS ground locations are clean, and grounds are securely fastened for optimum metal-to-metal contact. Poor grounding can cause intermittent problems that are difficult to diagnose.