LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Sedona Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Interior >> Crash Pad >> Replacement >> Shroud Replacement

Shroud Replacement

  1. Loosen the screws.
  2. Disconnect the connector, then remove the shroud assembly (A).
    Fig 1: Identifying Shroud Assembly And Screw
    G04884095Courtesy of KIA MOTORS AMERICA, INC.
  3. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals