Power Supply Circuit Inspection

Check open in ground circuit
1. Ignition "ON" & engine "OFF".
2. Measure the resistance between Right turn signal lamp power circuit of FAM (BCM-FE-39) and turn lamp (E25-1)..
  Specification: 0 Ω
  
  Fig 1: Measuring Resistance Between Right Turn Signal Lamp Power Circuit Of FAM (BCM-FE-39) And Turn Lamp (E25-1)
  Courtesy of KIA MOTORS AMERICA, INC.
3. Is the measured resistance within the specification?
  YES
  
  Go to "GROUND CIRCUIT INSPECTION ".
  
  NO
  
  Repair open to ground in power circuit and go to "VERIFICATION OF VEHICLE REPAIR ".