Component Inspection
- Connect oil pressure gauge to "UD" and "L/R" and "RED" port.
- Engine "ON".
- Drive a car with gear position 1 in "SPORTS MODE".
- Compare it with reference data as below.
Specification: refer to Standard Oil Pressure Table as below
OIL PRESSURE SPECIFICATION CHARTLEVER POSITION INPUT SPEED VFS CURRENT SOLENOID VALVE DUTY (%) ELEMENT P(MPa) LR DCC 2ND UD OD RED(1) D 2500rpm 200mA 0 0 100 0 100 0 LR 1.03±0.02 ↑ ↑ ↑ 60 ↑ ↑ ↑ ↑ ↑ 0.52±0.04 ↑ ↑ ↑ 75 ↑ ↑ ↑ ↑ ↑ 0.23±0.04 ↑ ↑ ↑ 100 ↑ ↑ ↑ ↑ ↑ 0 ↑ ↑ ↑ 100 ↑ 0 0 100 0 2ND 1.03 ±0.02 ↑ ↑ ↑ ↑ ↑ 60 ↑ ↑ ↑ 0.55±0.04 ↑ ↑ ↑ ↑ ↑ 75 ↑ ↑ ↑ 0.22±0.04 ↑ ↑ ↑ ↑ ↑ 100 ↑ ↑ ↑ 0 ↑ ↑ ↑ 100 ↑ 100 0 0 0 OD 1.03±0.02 ↑ ↑ ↑ ↑ ↑ ↑ ↑ 60 ↑ 0.52±0.04 ↑ ↑ ↑ ↑ ↑ ↑ ↑ 75 ↑ 0.21 ±0.04 ↑ ↑ ↑ ↑ ↑ ↑ ↑ 100 ↑ 0 ↑ ↑ ↑ 100 ↑ 100 0 0 0 UD 1.03±0.02 ↑ ↑ ↑ ↑ ↑ ↑ 60 ↑ ↑ 0.47±0.04 ↑ ↑ ↑ ↑ ↑ ↑ 75 ↑ ↑ 0.17±0.04 ↑ ↑ ↑ ↑ ↑ ↑ 100 ↑ ↑ 0 ↑ ↑ ↑ 100 ↑ 0 100 0 0 RED(1) 1.03±0.02 ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ 60 0.54±0.04 ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ 75 0.27±0.04 ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ 100 0 ↑ ↑ ↑ 100 ↑ 0 100 0 100 DIR(1) 0 ↑ ↑ ↑ 75 ↑ ↑ ↑ ↑ ↑ 0.27±0.04 ↑ ↑ ↑ 60 ↑ ↑ ↑ ↑ ↑ 0.54±0.04 ↑ ↑ ↑ 0 ↑ ↑ ↑ ↑ ↑ 1.03 ±0.02 R ↑ 250mA 0 ↑ 100 100 100 0 LR 1.55 ±0.25 (1) The values are subject to change according to vehicle model or condition. - Is oil pressure value within specifications?
YES
- Repair AUTO TRANSAXLE (Clutch or Brake) as necessary and Go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Replace AUTO TRANSAXLE (BODY CONTROL VALVE faulty) as necessary and Go to "VERIFICATION OF VEHICLE REPAIR " procedure.