LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2006 >> Rio Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) >> DTC P0650 Malfunction Indicator Lamp (Mil) Control Circuit >> Power Circuit Inspection

Power Circuit Inspection

  1. Key "OFF".
  2. Disconnect Cluster connector (M09-1).
  3. Measure the voltage between terminal 11 of Cluster harness connector and chassis ground.

    Specification: B+

  4. Is the measured voltage within specification?

    YES 

    NO 

    • Check the fuse (CLUSTER 10A) between Battery and Engine MIL.
    • Repair Open or Short in power circuit, and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals