Fuel Tank Line Inspection
- Relieve the fuel system pressure and remove the fuel tankCAUTION: Before removing the fuel tank, make sure the fuel hoses are not leaking onto the fuel tank.
- Block the following outlets:
- Fuel lines
- Fuel filler neck
- Apply maximum of 2 psi pressure to the EVAP. hose from fuel tank. Then, pinch the EVAP. hose to retain the pressure
- Check the suspect area for leaks with a soap solution.
- Were any leak(s) found?
YES
- Repair or replace leaking system component(s) and go to "VERIFICATION OF VEHICLE REPAIR " procedure
NO
- Thoroughly check connectors for loose or poor connections, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure