LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Grand Cherokee Laredo E, AWD, Full Time T/Case Control >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Supercharger System >> Manifold, Coolant Crossover >> Removal

Manifold, Coolant Crossover: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Drain the cooling system. Refer to DRAINING  .
  3. Remove the cowl cover panel. Refer to COVER, COWL PANEL, REMOVAL .
    GC0170369Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the charger air cooler temperature sensor (2) wire harness connector (1).
    GC0170562Courtesy of CHRYSLER GROUP, LLC
  5. Remove the Low Temperature Radiator (LTR) circuit hoses from the coolant crossover (1).
    GC0170350Courtesy of CHRYSLER GROUP, LLC
  6. Remove the coolant crossover manifold mounting bolts (1).
  7. Remove the coolant crossover manifold from the vehicle.
scientia non olet · About LEMON Manuals