LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Cherokee Latitude Plus, 4WD >> Labor Times >> Other Variant >> Drivelines and Axles >> Axle Shafts - Front >> Axle Shaft Assembly >> Remove & Install or Remove & Replace

Remove & Install or Remove & Replace

WARNING: This page is about the Cherokee 80th Anniversary Edition, 2.0L Eng VIN N, 4WD, Automatic T/Case Control, which is a different variant/trim than selected.

TRANSAXLE TYPE

NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.

Applies ToNoteStandard HoursWarranty HoursSkill Level
4WD, Both SidesDOES NOT include drain and refill Transmission Fluid or Fluid Level check. DOES NOT include wheel alignment.1.8B
4WD, Left SideDOES NOT include drain and refill Transmission Fluid or Fluid Level check. DOES NOT include wheel alignment.1.2B
4WD, Right SideDOES NOT include drain and refill Transmission Fluid or Fluid Level check. DOES NOT include wheel alignment.1.2B
Combination Procedure: AXLE SEAL: Remove & Replace:
4WD, LeftDOES NOT include drain and refill Transmission Fluid or Fluid Level check.0.2B
4WD, Right,Transfer Case,OuterDOES NOT include drain and refill Transmission Fluid or Fluid Level check.0.2B
4WD,2.0L Eng, Right,At Transaxle,BothDOES NOT include drain and refill Transmission Fluid or Fluid Level check. Includes: R&I Transfer Case Assembly.3.6B
Combination Procedure: AXLE SHAFT BOOT KIT: Remove & Replace:
Inner &/or Outer,Each Side1.0B
Combination Procedure: CONSTANT VELOCITY JOINT: Remove & Replace:
Each0.5B