LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Tube, Heater Hose, Supply >> Removal >> 6.2L

Tube, Heater Hose, Supply: Removal: 6.2L

  1. Disconnect and isolate the negative battery cable.
  2. Drain the cooling system. Refer to STANDARD PROCEDURE .
  3. Remove the supercharger. Refer to SUPERCHARGER, REMOVAL .
    GC0180937Courtesy of CHRYSLER GROUP, LLC
  4. Remove heater hoses (3) from heater tubes.
  5. Remove the bolt(s) (1 and 2) securing heater tube(s) to the back of cylinder head
    GC0180917Courtesy of CHRYSLER GROUP, LLC
  6. Remove the bolt (2) securing the right side heater tube to the timing cover.
  7. Remove the right side heater tube from water pump housing.
  8. Remove the bolt (1) and the left side heater tube (1) from water pump housing and remove the heater tube from vehicle.
scientia non olet · About LEMON Manuals