Sensor, Manifold Air Pressure (Map): Removal: 3.6L

Fig 1: Engine Cover

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable.
2. Remove the engine cover (1).
   Fig 2: MAP Sensor Electrical Connector

   Courtesy of CHRYSLER GROUP, LLC
3. Unlock and disconnect the electrical connector (1) from the MAP sensor.
   Fig 3: Removing MAP Sensor

   Courtesy of CHRYSLER GROUP, LLC
4. Rotate the MAP sensor 1/4 turn counterclockwise and pull the sensor straight up and out of the upper intake manifold.
   Fig 4: O-Ring

   Courtesy of CHRYSLER GROUP, LLC
5. The MAP sensor O-ring (1) can be reused if not damaged.