LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> Dismounting/Mounting Procedures >> Tire Pressure Sensor >> Removal

Tire Pressure Sensor: Removal

  1. Raise and support vehicle. Remove tire and wheel assembly from vehicle.
  2. Let the air out of the tire.
  3. Remove sensor nut.
  4. Remove sensor from wheel. See Fig 3.
Fig 1: Identifying Tire Pressure Sensor Components (1 Of 2)
G00225419Courtesy of CHRYSLER CORP.
Fig 2: Identifying Tire Pressure Sensor Components (2 Of 2)
G00225420Courtesy of CHRYSLER CORP.
Fig 3: Removing & Installing Tire Pressure Sensor
G00225421Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals