LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander 2WD V8-4.7L >> Repair and Diagnosis >> Heating and Air Conditioning >> Compressor Clutch Relay >> Service and Repair >> A/C Clutch Relay - Removal

A/C Clutch Relay - Removal






REMOVAL






NOTE: LHD gasoline model shown. Diesel and RHD models similar.

1. Disconnect and isolate the negative battery cable.
2. Open the cover of the power distribution center (PDC) (1) located in the engine compartment.
3. Remove the A/C clutch relay (2) from the power distribution center.