LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Wrangler Sahara, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Exhaust System >> Catalytic Converter >> Installation >> Installation - 2.4L

Installation - 2.4L

  1. Position the mini catalytic converter assembly onto the exhaust pipe flange and the exhaust manifold. Tighten the nuts to 31 N.m (23 ft.lbs.) torque. Tighten the flange nuts to 28 N.m (21 ft. lbs.).
  2. Connect oxygen sensor wiring.
  3. Lower the vehicle.
  4. Start the engine and inspect for exhaust leaks and exhaust system contact with the body panels. Adjust the alignment, if needed.
scientia non olet · About LEMON Manuals