Power Door Lock Test 5A - Doors Fail To Lock From Any Switch

WARNING: This page is about a different car, the 1996 Plymouth Breeze, 1996 Dodge Stratus, and 1996 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform POWER DOOR LOCK TEST 1A before proceeding with this test. For connector terminal identification and wiring diagrams, see CONNECTOR IDENTIFICATION section in this article. Perform VERIFICATION TEST VER-1A after each repair.

CAUTION: Always turn ignition switch to OFF position prior to disconnecting or connecting any module connector.

Using scan tool, actuate door locks. If door locks operate, go to next step. If door locks do not operate, replace BCM.
Using scan tool, read left front door ajar status and close left front door. If scan tool displays, LF DOOR: OPEN, replace BCM. If scan tool does not display, LF DOOR: OPEN, go to DOOR AJAR TEST 2A.