LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1987 >> Cherokee Limited >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System - 4.0L W/Solid State Ignition (SSI) >> Removal & Installation >> Electronic Control Unit (Ecu) >> Installation

Electronic Control Unit (Ecu): Installation

  1. Connect the ECU wiring harness connector.
  2. While holding the ECU in position, attach the 3 ECU attaching screws. See Figure. 3 Connect the negative battery cable.
scientia non olet · About LEMON Manuals