LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2000 >> XJR >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (External Controls) >> Removal & Installation >> Selector Lever Switch >> Removal

Selector Lever Switch: Removal

WARNING: This page is about a different car, the 2002 Jaguar XK8 and 2001 Jaguar XK8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove battery cover and disconnect ground cable from battery terminal. Refer to BATTERY DISCONNECTION PROCEDURE .
  2. Remove the gear shift knob. See TRANSMISSION SELECTOR LEVER KNOB .
  3. Remove the console finisher veneer panel. See FLOOR CONSOLE FINISH PANEL .
  4. Remove the J-gate surround. See SELECTOR LEVER GATE FINISH PANEL .
  5. Remove the D to 4 switch.
    • Press the retaining tangs to release.
    Fig 1: Removing "D" To 4 Switch
    G00378931Courtesy of JAGUAR CARS, INC.
scientia non olet · About LEMON Manuals