LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> Ascender LS, 4WD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Front Seat Belt Buckle Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating Seat Belt Buckle Nut
    GM755837Courtesy of GENERAL MOTORS CORP.
  1. Install the seat belt buckle to the seat assembly.
    2. NOTE: Refer to Fastener Notice .
  2. Install the nut (1) which retains the seat belt buckle to the seat assembly.

    Tighten:  Tighten the front seat belt buckle nut to 52 N.m (38 lb ft).

    3. Fig 2: Identifying Connectors & Harness
    GM752865Courtesy of GENERAL MOTORS CORP.
  3. Connect the seat belt reminder wiring harness (3) on the driver seat.
  4. Install the front seat assembly. Refer to Front Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals