LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2006 >> i-350 >> Repair and Diagnosis (Single Page) >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Motor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical - 2.8L (LK5) or Intake Manifold Replacement in Engine Mechanical - 3.5L (L52).
    2. Fig 1: Locating Positive Battery Cable
    GM1313639Courtesy of GENERAL MOTORS CORP.
  2. Remove the starter solenoid S terminal nut (3) and disconnect the lead (4) from the starter.
  3. Remove the starter terminal nut (1) and disconnect the battery positive cable (2) from the starter.
    4. Fig 2: View Of Starter Motor
    GM1313646Courtesy of GENERAL MOTORS CORP.
  4. Remove the starter motor mounting nut (1) and bolt (4).
  5. Remove the starter motor (3) from the engine.
scientia non olet · About LEMON Manuals