LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1990 >> Impulse Standard >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering System - Power >> Lubrication >> Hydraulic System Bleeding

Hydraulic System Bleeding

  1. Turn steering wheel full left and turn engine off. Fill fluid reservoir to the MIN mark. Start engine and idle for 30 seconds. Stop engine. Fluid should be at MIN mark. Add fluid if necessary.
  2. To bleed system, turn steering wheel from full left to full right, 3 or 4 times, without hitting locks. System is free of air when there is no buzz in hydraulic line.
scientia non olet · About LEMON Manuals