Removal and Installation: Installation
Installation is in the reverse order of removal.
CAUTION:
- Do not reuse O-ring for EVAP canister vent control valve.
- Do not add lubrication to the O-ring.
- Make sure the surfaces that the O-ring comes in contact with are clean.
- Make sure the O-ring is not twisted or rolled over.
- Make sure the O-ring (1) is seated all the way down with no gap as shown.
 Courtesy of NISSAN NORTH AMERICA, INC.
|
- Install EVAP canister lower protector bolts and nuts to the specified torque in the sequence shown.
 Courtesy of NISSAN NORTH AMERICA, INC.
|
|
Bolts 1, 2
|
: 10 N.m (1.7 kg-m, 89 in-lb)
|
|
Nuts 3, 4
|
: 7 N.m (0.71 kg-m, 62 in-lb)
|
- Install EVAP canister lower protector bolts (A) to specification.
 Courtesy of NISSAN NORTH AMERICA, INC.
|
|
Bolt (A)
|
: 10 N.m (1.7 kg-m, 89 in-lb)
|