Work Procedure
- WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Write vehicle specification into AV control unit.
To write vehicle specification stored in CONSULT into the AV control unit
GO TO STEP 2 .
To write vehicle specification into the AV control unit by hand
GO TO STEP 3 .
- WRITE STORED DATA
CONSULT Configuration
Select "After Replace ECU" in "Read/Write Configuration." Write data stored in CONSULT with the "Before Replace ECU" function into the AV control unit.
GO TO STEP 4 .
- MANUALLY WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Perform "Manual Configuration." Refer to the Configuration List to write vehicle specification into the AV control unit. Refer to CONFIGURATION LIST .
NOTE:If selection items are not displayed on the CONSULT screen, touch "NEXT."
GO TO STEP 4 .
- OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
WORK END