Removal and Installation: Removal
- Remove third seat cushion and third seatback assembly. Refer to "REMOVAL AND INSTALLATION ".
- Remove luggage side lower finisher. Refer to "LUGGAGE SIDE LOWER FINISHER: REMOVAL AND INSTALLATION ".
- Remove rear pillar finisher. Refer to "REAR PILLAR FINISHER: REMOVAL AND INSTALLATION ".
- Remove back pillar garnish. Refer to "BACK PILLAR GARNISH: REMOVAL AND INSTALLATION ".
- Remove luggage side upper finisher. Refer to "LUGGAGE SIDE UPPER FINISHER: REMOVAL AND INSTALLATION ".
- Disconnect the harness connector from side window glass.
- Apply protective tape around the side window to protect the painted surface from damage.
- Remove the side window glass using piano wire.WARNING: Always wear safety glasses and heavy gloves to prevent injury.CAUTION:
- Be careful not to scratch the glass when removing.
- Never set or stand the glass on its edge. Small chips may develop into cracks.