Removal and Installation: Removal

Remove the instrument lower cover. Refer to "EXPLODED VIEW ".
Remove the dash side finisher (RH). Refer to "DASH SIDE FINISHER: REMOVAL AND INSTALLATION ".
Remove the ECM cover bolts (A) and remove ECM cover (1).

Fig 1: Locating ECM Cover And Mounting Bolts
Courtesy of NISSAN NORTH AMERICA, INC.
Disconnect ECM harness connectors.
Remove ECM bracket bolt (A)
Slide the ECM bracket (1) upward and then remove ECM bracket with ECM.
Remove ECM bracket bolts (B) and separate ECM (2) and ECM bracket.

Fig 2: Removing ECM From Bracket

Courtesy of NISSAN NORTH AMERICA, INC.