Diagnosis Procedure

1. Perform initialization of BCM and reregistration of all Intelligent Keys using CONSULT.
2. Start the engine.

   Dose the engine start? 

   YES: INSPECTION END

   NO: GO TO 2.

1. Turn ignition switch OFF.
2. Disconnect BCM connector and dongle unit connector.
3. Check continuity between BCM harness connector and dongle unit harness connector.

   BCM		Dongle unit		Continuity
   Connector	Terminal	Connector	Terminal
   M68	24	M142	7	Existed

4. Check continuity between BCM harness connector and ground.

   BCM		Ground	Continuity
   Connector	Terminal
   M68	24		Not existed

   Is the inspection result normal? 

   YES: GO TO 3.

   NO: Repair or replace harness.

Check continuity between dongle unit harness connector and ground.

Is the inspection result normal? 

YES: Replace dongle unit.

NO: Repair or replace harness.